c
2020 Sun Hydraulics 1 of 1
MODEL
DMBF
FLeX Series 3-way, solenoid-operated directional spool valve
CAPACITY: 15 L/min. / CAVITY: T-150A
X-Control, A-Spool X-Control, N-Spool
P-Control, A-Spool P-Control, N-Spool
NOTE: DATA MAY VARY BY CONFIGURATION. SEE CONFIGURATION SECTION.
This FLeX Series solenoid-operated 3-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
TECHNICAL DATA
Maximum Operating Pressure 350 bar
Typical Valve Leakage at 110 SUS (24 cSt) Inlet on 1 164 cc/min.@350 bar
Typical Valve Leakage at 110 SUS (24 cSt) Inlet on 2 or 3 82 cc/min.@350 bar
Response Time - Typical 50 ms
Switching Frequency 15,000 max. cycles/hr
Seal kit - Cartridge Buna: 990150007
Seal kit - Cartridge Viton: 990150006
(X)CONTROL
X No Manual Override
P Manual Pull Override
(A)SPOOL CONFIGURATION
A Normally Open 1 to 2, Closed 1 to 3
N Normally Open 2 to 3, Closed 1 to 2
(N)SEAL MATERIAL
N Buna-N
E EPDM
V Viton
COIL *
No coil
* Additional coil options are available
sunhydraulics.com/model/DMBF
NOTES
Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.
An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.
Model Code Example: DMBFXANCONFIGURATION OPTIONS
